Binnacle Work Update

The previous post displayed pictures of the condition of the binnacle. After removing places and mounts each part was cleaned and wire stripped or sand blasted of paint and dirt. Some of the plates were pitted and they needed the indentions to be filled with filler in order to create a smooth surface for the primer and paint.

I discovered several parts that needed to be improved, fixed, or replaced. The list below indicated the areas need of attention:


Compass had a Bubble - may need to replace if can not fix leak.

Throttle Cable Worn in Protective Cover - replace cable.

Compass Light Wire Splices - too many splices discovered. Replace wire.

Steering Mechanism Lubrication - Apply new grease to gears.

Binnacle Metal Plate Pitted - lean, prime and repaint.

Fasteners Distorted - replace screws

Binnacle Guard Dirty - clean and buff the rail to a shine


While I apply effort on the above list, I have ordered a new cable and have spent time repairing cracks and chips in the cock pit ice box lid. Three other cockpit lids are getting scrutiny as I make plans for work on them.